To correct this problem, you can swap your light bulbs to LED bulbs, as they have no filaments to disrupt. Another potential issue that can cause you to go through light bulbs at a shocking rate is if there is a problem with the wiring that is connected to the fixture or how the fixture is connected to the wiring.
Not only can this issue lead your light bulbs to receive too much energy and burn out, but there is also the potential for an electrical fire. You can call our electricians to properly set up the fixture and correct this issue. Should the problem lie with the wiring that is connected to your light fixture, you can have our electricians to replace the wiring. It is critical that you have bad wiring fixed as soon as possible, as it has a high potential for causing a house fire, so be sure to contact us about our wiring services to protect your home.
Sometimes, your light bulbs burn out due to a poor connection with the light fixture. This connection issue may be caused by how tight or lose you have screwed the bulb into the fixture. If it is too loose, the bulb can struggle to connect to the electrical current and the infrequent connection can short-out the bulb. But if the bulb is screwed in too tight, it can damage the fixture-to-bulb connection point, leading you to need a new fixture eventually.
Bulbs that overheat can have a much shorter lifespan than you may expect from your light bulbs. You are relaxing in your home in the evening, about to curl up with a good book, when suddenly your light bulb blows out. You flip your switches and replace your bulbs, which seems to stabilize everything, but then it happens again. Why is this happening?
Is this cause for concern? Before you start to worry, you should learn about how and why your light bulbs keep blowing out. There are many reasons why it can occur, and there are also several things you can do to solve this problem. Take a look at the following guide below to see how you can fix your blown-out lighting. If you invested in some cheap incandescent light bulbs, they are more likely to blow than other types of bulbs. This is because the chemicals and materials used to make the bulbs are a lot thinner than normal, so any surge in electrical power will cause them to break.
The electricity may have jumped from one point to another, causing a surge of more energy than the bulb expects. Try switching to LEDs. High Voltage - The voltage powering your home might be higher than normal. This will cause bulbs to burn brighter and hotter, noticeably shortening their lifespan. If your outlets measure more than volts, call in your residential electrician.
Bad Vibrations - If the bulb in question is attached to, say, a ceiling fan or a garage door, fixture vibration might be to blame. Their heavy duty filaments are specifically built to withstand vibration. Switching to LED bulbs will also eliminate this issue.
Just like the voltage issue above, a bulb with too much wattage will burn too hot and burn out way too soon. Using the wrong bulb can also cause other safety issues, like melted insulation.
0コメント